Climeleon Configurator

Select the right Climeleon Wave for your air-conditioning or

heat pump outside unit.

The Climeleon Wave has been developed together with heat pump manufacturer Fujitsu General. It can be used with other makes if the unit complies with the conditions for certain types and dimensions.

 

Fill in the data below and find out quickly which Climeleon Wave type is suitable for your air-conditioning or heat pump outside unit.

 

Climeleon unit covers are not suitable for units with the fans on the top.

The maximum internal airflow is exceeded.

An analysis of the air flow is needed.

Note! Optional floor plates are needed, connected with two beams of 60mm.
Placement of the unit on beams increases stability.

Climeleon unit covers must be placed on a stable surface.

Note! The defrost water drainage must be investigated on-site by the installer.

If you do not know the air flow, you may leave this field empty.
Note! This indicates possible yield and capacity loss.

m3/u

Insufficient free air flow will cause yield and capacity loss.

Note! Also include protruding pieces in the measurement.

mm
mm
mm
mm
mm

There is not enough free height available within the housing.

There is not enough free width available within the housing.

There is not enough free depth available within the housing.

Result

Unfortunately, there is not a Climeleon Wave suitable for your unit.

is the suitable Climeleon unit cover.

Selection based on the dimensions and air flow of the outdoor unit, with roof plinths of 80 mm (optional), without vibration dampers.
You still have mm of free space for possible vibration dampers.
You are welcome to contact us if you would like a detailed study.

Want to know how many decibels you can dampen using this Climeleon Wave?

The illustrations used on this website are indicative.